|
International Home
International
Consumer
Appliances:
Ductless
International
Residential
Products:
Ducted Central Air
International
Commercial
Products:
International Light
Commercial Products:

|
 |

| |
|
| |
|
|
Features
- 18 and 20 gauge
G90 galvanized steel construction protected
by a baked-on polyester exterior finish.
- Quiet horizontal outdoor
fan discharge protected by a polyester coated
guard.
- All indoor coils are
four rows deep to improve dehumidification.
All refrigerant coils are constructed with long-life
rifled copper tubing, enhanced aluminum fin.
- Full length side mounting
brackets. Top rain flashing and sloped rain
hood built into cabinet. Bottom mounting bracket
provided to assist installation.
- Built-in condensate
drain trap.
- Permanently lubricated
PSC indoor and outdoor motors, multi-speed indoor
blower motor for ducted or free blow applications.
- Oversize accumulators,
integrated defrost control and hi-pressure switch
standard on all models for added reliability.
- Built-in circuit breakers
with lockable outside access door on all models
(Disconnect on 460 volt models).
- Large factory installed
filter area for improved filtration, 1"
disposable standard, 2" pleated optional.
- Barometric damper with
washable aluminum outside air filter allows
up to 40% fresh air. Standard on all models.
- Optional modulating
economizer with washable aluminum filter and
built-in relief allows up to 100% fresh air.
- Plug-in options and
heater receptacle minimize filed wiring of control
options and electric heaters. Standard on all
models.
- Also available in R407c
refrigerant.
- Emergency DC power supply
at 48V is also available.
Performance
- Efficiency rating of
up to 10.20 EER and 7.00 HSPF.
- Cooling capacities from
22,000 to 58,000 Btu/h.
- Refrigerant heating capacities
from 21,600 to 59,000 Btu/h.
- Electric heat available
from 5 to 22.5 kW.
- 208-230 single or three
phase and 460 volt three phase models available.
- A.R.I. performance certified,
UL and C-UL safety certified.
|
|

| Dimensions (mm/inches) |
| Model |
A |
B |
C |
D |
E |
F |
| HW24 |
1073 |
42-1/2 |
1022 |
40-1/4 |
502 |
19-3/4 |
692 |
27-1/4 |
302 |
11-7/8 |
527 |
20-3/4 |
| HW30, 36 |
1073 |
42-1/2 |
1022 |
40-1/4 |
502 |
19-3/4 |
711 |
28 |
352 |
13-7/8 |
457 |
18 |
| HW42,48, 60 |
1187 |
46-3/4 |
1137 |
44-3/4 |
610 |
24 |
660 |
26 |
403 |
15-7/8 |
762 |
30 |
| Model |
G |
H |
I |
J |
K |
L |
| HW24 |
200 |
7-7/8 |
57 |
2-1/4 |
505 |
19-7/8 |
1118 |
44 |
25.4 |
1 |
1791 |
70-1/2 |
| HW30, 36 |
200 |
7-7/8 |
57 |
2-1/4 |
708 |
27-7/8 |
1118 |
44 |
25.4 |
1 |
1791 |
70-1/2 |
| HW42, 48, 60 |
251 |
9-7/8 |
57 |
2-1/4 |
759 |
29-7/8 |
1118 |
44 |
25.4 |
1 |
2146 |
84-1/2 |

|