Herrmidifier by Fedders Evaporative Humidifier

	Get the specs for the Herrmidifier G-100 PDF | 62 KB
	Get the Consumer Guide for Herrmidifier Humidifiers PDF | 920 KB

This fan-assisted, evaporative humidifier is installed onto the supply duct, where warm dry air is forced across a moistened evaporator pad (wetted through the home's water supply) creating water vapor that is released into the home. Adjustable, precision-made humidistat allows the unit to be set for optimum relative humidity.

• Wall or duct mount humidistat
• Power cord with 3-prong grounded plug
• 120V to 24V Transformer
• 2” evaporator pad increases performance
• 120V/60Hz/2.0 Amp motor
• Self-piercing saddle valve
• Mounts on 14” sheet metal or fiberglass duct (w/kit)
• Cleanable/replaceable internal water filter protects solenoid
• Motor cap for easy access to wiring

• Herrmidifier humidifiers help provide a healthier, more comfortable indoor climate– because susceptibility to viruses and bacteria is greater when the inside air is too dry, maintaining proper humidity levels can help make indoor air healthier. See chart at bottom of page.
• Energy cost savings and increased comfort– indoor air will feel warmer at 68°F ( 20°C) when properly humidified than it will at 73°F (23° C) when relative humidity levels are too low. The Herrmidifier G-100 allows the homeowner to lower the thermostat, experiencing substantial savings on monthly energy bills, without sacrificing comfort.
• Protect fine furniture– because wood tends to shrink, split, and crack in an environment that is too dry, adding the proper amount of moisture to the air helps lessen these problems
• Quick and easy assembly and installation– with a self-piercing saddle valve, a 24 V brass solenoid valve, and just two screws needed to secure the cover, these units can be assembled in minutes and mounted on a 14" (356 mm) wide duct
• High capacity– this compact unit distributes 19 gallons per day, at 120°F (3.0 LPH @ 48.8°C)
• Power assisted humidification– 120 V, 1/20 hp (0.037 kW) fan motor helps deliver maximum humidity from a low profile unit
• More evaporative area– due to a deeper evaporator pad (2" thickness - 51 mm)
• Flexible humidity control– the wall-mounted or duct-mounted humidistat adjusts from 20% to 80% relative humidity
• Compact design– low profile unit can be installed in tight spaces such as closets, crawl spaces or attics

• 2-Year Warranty